<code id="padct"><ol id="padct"></ol></code>
    <td id="padct"><ruby id="padct"></ruby></td>
    <pre id="padct"></pre>
  • <track id="padct"><ruby id="padct"></ruby></track>

    1. <acronym id="padct"></acronym>

      CN ???ENGwelcome to the official website of Su Zhou United machine co.,ltd

      50 years focused on

      High tech enterprises. Horizontal screw centrifuge strength manufacturers

      0512-65657076

      139-0620-3239

      Location:首页>>News>>Company News

      Product line

      National Service Hotline

      0512-65657076

      The difference of three phase separated horizontal screw foundation settlement centrifugal

      Time:2021-06-21 08:30:04  Clicks:78

      The difference of three phase separated horizontal screw foundation settlement centrifugal dehydrator
      The two-phase separation horizontal screw foundation settlement centrifugal dehydrator is composed of motor shaft, hood, main rolling bearing, drum, screw, transfer case, driver system software and automatic control system. The drum and the screw run at high speed in the same direction of the differential, and the material enters the inner cylinder of the screw through the feeding pipe, and enters the drum from the feeding port. Under the effect of centripetal force, the heavy solid material accumulates on the inner wall of the drum to produce a residue layer. The spiral pushes the accumulated solid material to the cone end of the drum one after another and discharges it out of the main engine through the slag outlet. The lighter liquid phase materials produce inner liquid ring, which continuously overflows the drum from the overflow port at the big end of the drum and is discharged out of the main engine through the discharge port.
      The key of three-phase separation horizontal snail foundation settlement centrifugal dehydrator is to separate solid and liquid, that is, to separate one kind of solid (relatively high density) and two kinds of liquid with different relative density. The drum and the screw run at high speed in the same direction of the differential, and the material enters the inner cylinder of the screw through the feeding pipe, and enters the drum from the feeding port. Under the effect of centripetal force, solid materials accumulate on the inner wall of the drum to produce residue layer. The two liquid materials produce light liquid phase ring and heavy liquid phase ring respectively. From the beginning of the drum wall inward, they are solid layer, heavy liquid phase layer and light liquid phase layer successively. The screw continuously pushes the solid material accumulated in the inner wall of the drum to the cone end of the drum and discharges it out of the main machine through the slag outlet. The light liquid phase and heavy liquid phase continuously overflow from different overflow ports at the big end of the drum. Then the three phases are separated.


      Home Tel Contact
      人妻精品丝袜一区二区无码AV
      <code id="padct"><ol id="padct"></ol></code>
      <td id="padct"><ruby id="padct"></ruby></td>
      <pre id="padct"></pre>
    2. <track id="padct"><ruby id="padct"></ruby></track>

      1. <acronym id="padct"></acronym>